学术期刊列表

The crystallographic structure and morphology of redox active transition metal oxides have a pronounced effect on their electrochemical properties. In this work, h-MoO3 nanostructures with three distinct morphologies, i.e., pyramidal nanorod, prismatic nanorod and hexagonal nanoplate, were synthesized by a facile solvothermal method. The morphologies of h-MoO3 nanostructures were tailored by a controlled amount of hexamethylenetetramine. An enhanced specific capacitance about 230 F g−1 at an applied current density of 0.25 A g−1 was achieved in h-MoO3 pyramidal nanorods. Electrochemical studies confirmed that the h-MoO3 pyramidal nanorods exhibit superior charge-storage ability. This improved performance can be ascribed to the coexistence of its well exposed crystallographic planes with abundant active sites, i.e., hexagonal window (HW), trigonal cavity (TC) and four-coordinated square window (SW). The mechanism of charge-storage is likely facilitated by the vehicle mechanism of proton transportation due to the availability of the vehicles, i.e., NH4+ and H2O. The promising, distinct and unexploited features of h-MoO3 nanostructures reveal a strong candidate for pseudocapacitive electrode materials.

Erythrocytes are attractive as potential cell-based drug carriers because of their abundance and long lifespan in vivo. Existing methods for loading drug cargos into erythrocytes include hypotonic treatments, electroporation, and covalent attachment onto the membrane, all of which require ex vivo manipulation. Here, we characterized the properties of amphiphilic gold nanoparticles (amph-AuNPs), comprised of a ∼2.3 nm gold core and an amphiphilic ligand shell, which are able to embed spontaneously within erythrocyte membranes and might provide a means to load drugs into red blood cells (RBCs) directly in vivo. Particle interaction with RBC membranes occurred rapidly at physiological temperature. We further show that amph-AuNP uptake by RBCs was limited by the glycocalyx and was particularly influenced by sialic acids on cell surface proteoglycans. Using a reductionist model membrane system with synthetic lipid vesicles, we confirmed the importance of membrane fluidity and the glycocalyx in regulating amph-AuNP/membrane interactions. These results thus provide evidence for the interaction of amph-AuNPs with erythrocyte membranes and identify key membrane components that govern this interaction, providing a framework for the development of amph-AuNP-carrying erythrocyte ‘pharmacytes’ in vivo.

Colloidal perovskite oxide nanocrystals have attracted a great deal of interest owing to the ability to tune physical properties by virtue of the nanoscale, and generate thin film structures under mild chemical conditions, relying on self-assembly or heterogeneous mixing. This is particularly true for ferroelectric/dielectric perovskite oxide materials, for which device applications cover piezoelectrics, MEMs, memory, gate dielectrics and energy storage. The synthesis of complex oxide nanocrystals, however, continues to present issues pertaining to quality, yield, % crystallinity, purity and may also suffer from tedious separation and purification processes, which are disadvantageous to scaling production. We report a simple, green and scalable “self-collection” growth method that produces uniform and aggregate-free colloidal perovskite oxide nanocrystals including BaTiO3 (BT), BaxSr1−xTiO3 (BST) and quaternary oxide BaSrTiHfO3 (BSTH) in high crystallinity and high purity. The synthesis approach is solution processed, based on the sol–gel transformation of metal alkoxides in alcohol solvents with controlled or stoichiometric amounts of water and in the stark absence of surfactants and stabilizers, providing pure colloidal nanocrystals in a remarkably low temperature range (15 °C–55 °C). Under a static condition, the nanoscale hydrolysis of the metal alkoxides accomplishes a complete transformation to fully crystallized single domain perovskite nanocrystals with a passivated surface layer of hydroxyl/alkyl groups, such that the as-synthesized nanocrystals can exist in the form of super-stable and transparent sol, or self-accumulate to form a highly crystalline solid gel monolith of nearly 100% yield for easy separation/purification. The process produces high purity ligand-free nanocrystals excellent dispersibility in polar solvents, with no impurity remaining in the mother solution other than trace alcohol byproducts (such as isopropanol). The afforded stable and transparent suspension/solution can be treated as inks, suitable for printing or spin/spray coating, demonstrating great capabilities of this process for fabrication of high performance dielectric thin films. The simple “self-collection” strategy can be described as green and scalable due to the simplified procedure from synthesis to separation/purification, minimum waste generation, and near room temperature crystallization of nanocrystal products with tunable sizes in extremely high yield and high purity.

The uptake of nanoparticles by endothelial cells is dependent on shear stress adaptation and flow exposure conditions. Adaptation of primary human umbilical vein endothelial cells (HUVECs) to shear stress for 24 h was associated with reduced internalisation of unmodified 80 nm spherical gold nanoparticles (AuNPs) (mean hydrodynamic size of 99 nm in culture medium) after exposure to flow conditions compared with cells that were cultured and exposed to static conditions. Under static conditions, targeting of 80 nm AuNPs conjugated with antibodies against the intracellular adhesion molecule 1 (ICAM-1) (mean hydrodynamic size of 109 nm in culture medium) markedly increased the internalisation of AuNPs in HUVECs that were activated with the tumour necrosis factor (TNF), a treatment that markedly increased the surface expression of ICAM-1. Shear stress-adapted and TNF-activated HUVECs, which were exposed to flow conditions, had higher association with anti-ICAM-1 AuNPs than cells that were not TNF-activated or exposed to particles under static conditions. Hence, shear stress adaptation reduces the uptake of unmodified AuNPs and increases the association between anti-ICAM-1 AuNPs and TNF-activated HUVECs.

Nanowire-based ferroelectric-complementary metal–oxide–semiconductor (NW FeCMOS) nonvolatile memory devices were successfully fabricated by utilizing single n- and p-type Si nanowire ferroelectric-gate field effect transistors (NW FeFETs) as individual memory cells. In addition to having the advantages of single channel n- and p-type Si NW FeFET memory, Si NW FeCMOS memory devices exhibit a direct readout voltage and ultralow power consumption. The reading state power consumption of this device is less than 0.1 pW, which is more than 105 times lower than the ON-state power consumption of single-channel ferroelectric memory. This result implies that Si NW FeCMOS memory devices are well suited for use in non-volatile memory chips in modern portable electronic devices, especially where low power consumption is critical for energy conservation and long-term use.

Ultra-narrow linewidth in the extinction spectrum of noble metal nanoparticle arrays induced by the lattice plasmon resonances (LPRs) is of great significance for applications in plasmonic lasers and plasmonic sensors. However, the challenge of sustaining LPRs in an asymmetric environment greatly restricts their practical applications, especially for high-performance on-chip plasmonic sensors. Herein, we fully study the parallel plasmonic–photonic interactions in both the Au nanodisk arrays (NDAs) and the core/shell SiO2/Au nanocylinder arrays (NCAs). Different from the dipolar interactions in the conventionally studied orthogonal coupling, the horizontal propagating electric field introduces the out-of-plane “hot spots” and results in electric field delocalization. Through controlling the aspect ratio to manipulate the “hot spot” distributions of the localized surface plasmon resonances (LSPRs) in the NCAs, we demonstrate a high-performance refractive index sensor with a wide dynamic range of refractive indexes ranging from 1.0 to 1.5. Both high figure of merit (FOM) and high signal-to-noise ratio (SNR) can be maintained under these detectable refractive indices. Furthermore, the electromagnetic field distributions confirm that the high FOM in the wide dynamic range is attributed to the parallel coupling between the superstrate diffraction orders and the height-induced LSPR modes. Our study on the near-field “hot-spot” engineering and far-field parallel coupling paves the way towards improved understanding of the parallel LPRs and the design of high-performance on-chip refractive index sensors.

An ultrasonication-assisted successive ionic layer adsorption and reaction (SILAR) strategy was developed for uniform deposition of high density p-type Bi2O3 quantum dots on n-type TiO2 nanotube arrays (Bi2O3@TiO2 NTAs), which were constructed by electrochemical anodization in ethylene glycol containing the electrolyte. Compared with pristine TiO2 NTAs, the Bi2O3 quantum dots sensitized TiO2 NTAs exhibited highly efficient photocatalytic degradation of methyl orange (MO). The kinetic constant of Bi2O3@TiO2 NTAs prepared by an ultrasonication-assisted SILAR process of 4 cycles was 1.95 times higher than that of the pristine TiO2 NTA counterpart. The highly efficient photocatalytic activity is attributed to the synergistic effect between the formation of a uniform p–n heterojunction with high-density for enhancing light absorption and facilitating photogenerated electron–hole separation/transfer. The results suggest that Bi2O3@TiO2 p–n heterojunction nanotube arrays are very promising for enhancing the photocatalytic activity and open up a promising strategy for designing and constructing high efficiency heterogeneous semiconductor photocatalysts.

The C3N4-tyrosinase (TYR) hybrid is a highly accurate, sensitive and simple fluorescent probe for the detection of dopamine (DOPA). Under optimized conditions, the relative fluorescence intensity of C3N4-TYR is proportional to the DOPA concentration in the range from 1 × 10−3 to 3 × 10−8 mol L−1 with a correlation coefficient of 0.995. In the present system, the detection limit achieved is as low as 3 × 10−8 mol L−1. Notably, these quantitative detection results for clinical samples are comparable to those of high performance liquid chromatography. Moreover, the enzyme-encapsulated C3N4 sensing arrays on both glass slide and test paper were evaluated, which revealed sensitive detection and excellent stability. The results reported here provide a new approach for the design of a multifunctional nanosensor for the detection of bio-molecules.

It is challenging to quantify the contact resistance and to determine the nature of the molecule–electrode contacts in molecular two-terminal junctions. Here we show that potentiodynamic and temperature dependent impedance measurements give insights into the nature of the SAM–electrode interface and other bottlenecks of charge transport (the capacitance of the SAM (CSAM) and the resistance of the SAM (RSAM)), unlike DC methods, independently of each other. We found that the resistance of the top-electrode–SAM contact for junctions with the form of AgTS–SCn//GaOx/EGaIn with n = 10, 12, 14, 16 or 18 is bias and temperature independent and hence Ohmic (non-rectifying) in nature, and is orders of magnitude smaller than RSAM. The CSAM and RSAM are independent of the temperature, indicating that the mechanism of charge transport in these SAM-based junctions is coherent tunneling and the charge carrier trapping at the interfaces is negligible.

Patterns of hollow nanocone array films can be hidden in air and made to appear due to a solvent, enabling a smart method to hide information that can be recovered by a change of the environment.