The improvement of the high voltage performance of LiCoO2 by coating LiTaO3via magnetron sputtering
Literature Information
Chenhui Wang, Shaopeng Li, Weiyi Chen, Yining Zhao, Shu Xu, Hui Dou, Xiaogang Zhang
Lithium cobalt oxide (LiCoO2) is one of the most commercially successful cathode materials and has attracted much attention from researchers since its discovery. However, an increase in cut-off voltage generates problems such as structural damage and detrimental side reactions. Under this premise, a layer of LiTaO3 coating is sputtered on the surface of the LiCoO2 electrode by magnetron sputtering, which aims to inhibit the structural damage and the occurrence of side reactions under high voltage. Meanwhile, the ionic conductor layer of LiTaO3 can also promote the transmission process of Li+ and improve the power density. The results show that the capacity retention rate of the MS-2 h (magnetron sputtering for 2 hours) electrode is 86.6% at 0.5C for 100 cycles in a voltage range of 3.0–4.6 V, and the capacity of 91 mA h g−1 is achieved at 3C. The cycling stability of the electrode is also effectively improved at high temperature, and the capacity retention rate was 40.9% after 100 cycles at 50 °C. This work proves that the coating of LiTaO3 on the electrode surface by magnetron sputtering can effectively inhibit the damage of the electrode structure and the occurrence of side reactions during cycling and can promote the transmission of lithium ions.
Recommended Journals
Related Literature
IF 6.367
Sugar ketals as a platform molecule to overcome the limitation of converting biomass into green-hydrocarbons in a typical refineryIF 6.367
Palladium-catalyzed silaborative carbocyclizations of 1,6-diynesIF 6.222
Catalytic depolymerization of alkali lignin in ionic liquids on Pt-supported La2O3–SO42−/ZrO2 catalystsIF 6.367
Triboelectric nanogenerators for a macro-scale blue energy harvesting and self-powered marine environmental monitoring systemIF 6.367
A hollow neuronal carbon skeleton with ultrahigh pyridinic N content as a self-supporting potassium-ion battery anodeIF 6.367
Front coverIF 6.222
Carbon and carbon composites obtained using deep eutectic solvents and aqueous dilutions thereofIF 6.222
A model-based comparison of Ru and Ni catalysts for the Sabatier reactionIF 6.367
Selective light driven reduction of CO2 to HCOOH in water using a {MoV9}n (n = 1332–3600) based soft-oxometalate (SOM)IF 6.222
Source Journal
CrystEngComm

CrystEngComm is the forum for the design and understanding of crystalline materials. We welcome studies on the investigation of molecular behaviour within crystals, control of nucleation and crystal growth, engineering of crystal structures, and construction of crystalline materials with tuneable properties and functions. We publish hypothesis-driven research into… how crystal design affects thermodynamics, phase transitional behaviours, polymorphism, morphology control, solid state reactivity (crystal-crystal solution-crystal, and gas-crystal reactions), optoelectronics, ferroelectric materials, non-linear optics, molecular and bulk magnetism, conductivity and quantum computing, catalysis, absorption and desorption, and mechanical properties. Using Techniques and methods including… Single crystal and powder X-ray, electron, and neutron diffraction, solid-state spectroscopy, spectrometry, and microscopy, modelling and data mining, and empirical, semi-empirical and ab-initio theoretical evaluations. On crystalline and solid-state materials. We particularly welcome work on MOFs, coordination polymers, nanocrystals, host-guest and multi-component molecular materials. We also accept work on peptides and liquid crystals. All papers should involve the use or development of a design or optimisation strategy. Routine structural reports or crystal morphology descriptions, even when combined with an analysis of properties or potential applications, are generally considered to be outside the scope of the journal and are unlikely to be accepted.